What a Hastings Home Inspection Includes (and Its Limits)
Hastings, MN

What a Hastings Home Inspection Includes (and Its Limits)

Every system a full inspection covers — and the honest limits of a visual, non-invasive review.

A home inspection is a visual, non-invasive evaluation of the readily accessible systems and components of a house. In Hastings and across Dakota County, a full inspection follows a recognized standard of practice and typically takes two to three hours on site for an average single-family home — longer for the historic homes downtown. Here is what is actually examined, and just as importantly, what a visual inspection cannot tell you.

Structure and foundation

We evaluate the foundation, framing where visible, and signs of movement or moisture. In Hastings this means paying real attention to bluff-zone settlement and, in older downtown homes, limestone rubble walls — conditions a generic national checklist simply misses.

Roof, exterior and grounds

Roof covering, flashing, gutters and drainage; siding, trim and windows; grading and how water moves around the home. Roofs we can safely walk, we walk; slate, tile, steep or wet roofs we inspect from a ladder, binoculars and drone, and we say so.

The major systems

Electrical service and panel, with attention to the Federal Pacific panels and aluminum wiring common in this area; plumbing supply, drainage and the water heater; heating and cooling, including furnace age and visible heat-exchanger condition. We test what is safe to test in the season we are in, and we note the limits honestly.

What a visual inspection cannot do

We do not open walls, move heavy storage, or dismantle equipment. We cannot see inside a sewer lateral without a scope, measure radon without a test, or detect PFAS without a lab. Those are add-ons we recommend when they matter — and in Hastings, they often do. An honest inspection is as clear about its limits as it is about its findings.

Instant quote

Get your quote in 60 seconds.